Expert PAT testing service for Newcastle upon Tyne, Sunderland and Durham areas

Giving you peace of mind that your electrical equipment is safe to use

Richard Ayre, DRA PAT Testing
0191 666 1009
07897240878
Email us
Contact us

Free Repairs

We do free repairs, for example; if you have a damaged or defective plug or fuse we will replace it, free of charge; if the cable is cut we’ll cut it back to a safe location and re-attach the plug. We don’t charge to do this.

Some companies will charge as much as five pounds to replace a standard 13-amp plug; we don’t charge anything.

Some companies charge one pound for every fuse they replace! We don’t charge a penny.

You know that if we replace a plug it needs replacing, because it cost us to do it – with companies  that charge, you’ll find you need to replace a lot of plugs and fuses (you probably didn’t).

If we come across the need to repair the existing plug, replace the plug, replace a fuse, or repair a damaged cable we do so automatically without any further charges being incurred by you – for free. 

  • Free repairs to the existing plug
  • Free replacement plugs (standard BS1363 type)
  • Free replacement fuses (3amp, 5amp, 13amp)
  • Free repairs to the existing cable and plug refitted/new supplied
  • In-scope repairs to the existing appliance such as tightening of screws and reattaching safety guards 
Broken fan heater plug needs free repairs
Free repairs including replacement plugs and fuses like these in the picture

Free repairs – Plugs Supplied and Fitted

Plugs get damaged, that’s a fact of life – they’re built well, they’re robust (usually, when genuine) but now and again they get damaged – the plastic casing breaks which is why a lot of manufacturers have moved over to sealed rubber plugs; or the pins get bent. 

When this happens the plug needs replacing; we replace plugs for free. 

A plug costs us about 50p; we replace on average one for each job, so is there really any point charging for it? Not really. Some of those 50p per item companies though; they’ll charge you up to five pounds for a plug.

If we spot a damaged plug during the visual inspection we will replace it free of charge – free repairs.

If however the plug can be repaired; we’ll repair it. Repairs including rewiring because some who was not a competent person has tried to repair it, tightening screws, etc. Do you know how to wire a plug?  

Free repairs to Industrial Adaptors

Industrial adaptors are different; they’re costly to buy (£5 to £20 pounds usually), and are difficult and time consuming to fit. Whilst we generally do free repairs on them, if we have to replace the adaptor we will charge for it – but we will talk to you first before we do it.

We tend not to carry these parts, apart from the odd 110v adaptor, so we’ll talk to you about the options available. Which may include us going for the parts, returning and fitting them or quoting to do it at a different date. 

This table shows the different types of industrial adaptor available.

Types of industrial plugs