Earth Continuity Testing The IEE Code of Practice recognises four test situations. 1. Type Testing to an appropriate standard 2. Production testing 3. In-Service testing 4. Testing after repair This document is limited in covering topics concerned with In Service Testing only. Electrical Safety relies on a good earth connection. This is the testing carried out as a routine to determine whether the equipment is in a satisfactory condition. In-Service testing will involve the following: (a) Preliminary inspection (b) Earth continuity tests (for Class 1 equipment) (c) Insulation testing (Which may sometimes be substituted by earth leakage measurement) (d) Functional checks. Electrical testing should be performed by a person who is competent in the safe use of the test equipment and who knows how to interpret the test results obtained. This person must be capable of inspecting the equipment and, where necessary, dismantling it to check the cable connections. If equipment is permanently connected to the fixed installation, e.g. by a flex outlet or other accessory, the accessory will need to be detached from its box or enclosure so that the connections can be inspected. Such work should only be carried out by a competent person. The Earth Continuity Test [...]